High-tech LED indoor lighting design national tour seminar successfully ended

On June 18th, 2012, Changsha Station, the tenth station of Gaogong LED Indoor Lighting Design National Tour Seminar, successfully concluded in Furong Tianhua Hotel in Furong District, Changsha City. The convening of this seminar also marked the high-tech LED lasted for three months, and turned to the indoor lighting of ten national LED industry towns (including Beijing, Xi'an, Nanjing, Hangzhou, Shanghai, Chengdu, Chongqing, Shenzhen, Guangzhou, Changsha). Design a national tour seminar to draw a perfect ending.



At the Changsha Station of the seminar, we received the full support of the Hunan Provincial Interior Decoration Association. Together with representatives of local distributors, designers and engineering companies, it was estimated that more than 120 people participated in the seminar. As an important transportation hub and cargo distribution center in the central region, Changsha has gathered a large number of excellent interior lighting designers as well as lighting distributors and lighting agents. The guests attending this seminar include:

Mr. Yao Baolin, President of Hunan Interior Decoration Association Mr. Li Jinlong, Secretary General of Hunan Interior Decoration Association, Ms. Fan Guixiang, Deputy Secretary General of Hunan Interior Decoration Association, Mr. Lu Zhiwei, Product Manager of Tsinghua Tongfang, Mr. Zeng Li, Director of Investment Channel, Guangdong Guosheng, Manager of Guangyu Lighting, South China Mr. Wan Youjun, Creative Director of Chen Zhibin Design Office Mr. Chen Zhibin, Mr. Liu Ruibo, Director of Asia Pacific Villa Design, Mr. Liu Ruibo, Design Director of Huizhi Decoration Engineering Co., Ltd. Mr. Liu Meng, Design Director of Casual Decoration Group, Mr. Pan Dan, Mr. Zhou Yikun, Director of Decoration Design


Mr. Yao Baolin, President of Hunan Interior Decoration Association

At the beginning of the seminar, Mr. Yao Baolin, the president of Hunan Interior Decoration Association, first addressed the event. He mentioned that lighting design is an important component of interior decoration, and in the future, LED will become the mainstream of lighting design. At present, there are 600,000 interior decoration designers and only 8,000 lighting designers in the country. Therefore, lighting designers have broader development prospects and room for improvement, so interior designers must pay attention to LED lighting design.


Tsinghua Tongfang Product Manager Mr. Lu Zhiwei

Mr. Lu Zhiwei, Tsinghua Tongfang Product Manager, started from five specific LED lighting cases, covering various areas such as clubhouse restaurants, villa residences, hotel rooms, commercial retail, and office space. He elaborated on the advantages and disadvantages of LED lighting products and summarized the LED products in Principles and directions to be followed in indoor lighting applications, including compliance with Architectural Lighting Design Standards, with emphasis on energy conservation.

The Strain Clamp is primarily used to fix the conductor, ground wire terminals on tension towers of overhead lines, distribution lines and distribution equipments in substations, power plants. Suspension Strain Clamp also can fix the guy wire terminals on poles. Moreover, Strain Clamp For Overhead Line bears all the tension of conductors, ground wires and lightning conductors. Strain Cable Clamp is used to tension conductors and earth wires and must therefore satisfy the most stringent requirements.

There are two basic systems of tension clamps, as follows:
1.Detachable clamps, such as wedge-type tension clamps, thimbles,bolted type tension clamps, which allow for subsequent adjustment.
2.Non-detachable clamps, such as compression dead-end clamps which require absolute matching to the conductor length.


According to its configuration and installation means, the strain clamp can be divided into compression type, bolt type and wedge type. Generally, the compression type includes hydraulic compression type and explosive compression type.
Generally, malleable cast iron, steel, and aluminum alloy are used as it's materials.

Features

1.High strength and versatility, can be used with a variety of metal fittings.
2.Good corrosion resistance
3.Simple installation
4.Installation quality is easy to guarantee
5.Optional anti-theft ring to effectively solve the anti-theft problem.


Strain clamps

We warmly welcome friends both domestic and abroad to visit our company, if you have any questions, please contact with us directly.

Strain Clamp

Strain Clamp,Suspension Strain Clamp,Strain Cable Clamp,Strain Clamp For Overhead Line

FUZHOU SINGREE IMP.& EXP.CO.,LTD. , https://www.cninsulators.com

Posted on