By adopting high-efficiency LED modules, and respectively utilizing the heat dissipation area of ​​the slit portion of the "gap structure" which efficiently dissipates the heat of the LED module, it is expanded to about 1.3 times of the original product, and further expanding the LED light diffusion range and reducing the illumination of the lampshade. Technologies such as the “light diffuser†achieve brightness and illumination range comparable to 100W incandescent bulbs. Compared with the 100W incandescent bulb, the power consumption is about 1/6, and the rated life is 40 times, which is 40,000 hours.
LED bulbs consume only 15W, so fixtures that use 60W and 40W incandescent bulbs can also be used. Hitachi explained that because these lamps can provide the same brightness as 100W incandescent bulbs, you can easily increase the brightness and save energy by simply replacing the incandescent bulbs.
The new product has a protection function that automatically controls the temperature (the brightness also drops) when the temperature and humidity rise, so it can also be used for closed lamps. However, it cannot be used outdoors, and the dimmer is not yet supported. In addition, the size is 60 mm in outer diameter and 123 mm in length, which is one turn larger than the 100W incandescent bulb, so there may be cases where the existing lamps cannot be used due to size problems.
On the same day, Hitachi will also launch LED bulbs with brightness equivalent to 80W incandescent bulbs (1160Lm). The product number is "LDA15L-G". Other parameters such as size and life are basically the same as LDA15D-G. The price is open.
To increase battery voltage and capacity of a power system, cells have to be connected in series or in parallels. Due to unequal self-discharge and physical variations of the cells as different as it was made in factory, the State-Of-Charge(SOC) of the cells will differ sooner or later in the following no matter whether it been used or not. Therefore, the discharge process has to be stopped when one cell has reached its minimum voltage and the energy in the other cells is waste. The utilizable energy of a series circuit is limited by the weakest cell in the pack. To completely discharge all cells, weaker cells must be recharged. This process is called cell balancing or cell equalizing, which is much more energy-efficient than any other methods. And it is very important for prolonging battery lifespan due to reducing internal resistance and slowly sulfided.
Our Battery Equalizer is designed specially for Electric Vehicle Power, which it packed in series by 12V cells. The equalizer with smaller smart pulse is installed onto battery bank in everyday's driving. Keeping all the batteries in your electric vehicles equalized allows them to be completely charged and to give off a completely discharged. And make to give you a longer travelling distance and better experience. By adding our smart pulse equalizer to your vehicle power battery bank, the cell batteries are desulfated and equalized on a consistent basis so they will always be in as new ones. When there is no internal resistance in the cell batteries, there is less wear and tear when vehicles starting and being speed up. The total electrical power system benefits as the batteries are equal as in like new conditions.
Smart pulse Equalizing system for 48, 60, 72-Volt battery banks, patented pulse technology reduces and prevents sulfation buildup. Maximizes the performance of all lead-acid battery including VRLA, AGM, GEL and Flooded cell batteries.
Electric Vehicle Battery Equalizer
Electric Vehicle Battery Equalizer,Battery Equalizer,Power Battery Equalizer,Tricycle Smart Battery Equalizer
Shenzhen Daceen Technology Co., Ltd. , https://www.daceen-sz.com