How to install Lynx Box?
Lynx Box Exchange Group,
Step one: Connect Lynx Box and TV
LCD TV with HDMI high-definition cable to connect the TV and Lynx box, as shown in the HDMI HD cable, and HDMI interface
Step 2: Connect the Lynx box to the standard power cord. The figure shows the box power cord (note: the power cord socket and the AV interface are similar in shape; do not plug the power cord into the AV port);
Second, Lynx Box how to connect the network?
After using Tmall's Box HDMI HD cable to connect the TV (or AV to connect the old TV), the Tmall Box plugs in the power and turns on automatically. Use the TV's remote control to turn on the TV and switch to the HDMI signal input (old TV switches to the AV signal Source), the TV will appear in the boot screen of the box, and then enter the network setting interface, as shown in the figure. There are three ways to connect to the internet.
Manner 1: Wired connection selection The user connected with the router directly connects the network cable to the cable interface of the box (router opens the DHCP automatic IP assignment function), and it can be used without any other operations. The following is the magic box network cable interface.
Method 2: Wireless WIFI Network
1). Use the remote control of the box to operate the TV screen (set the remote controller at the box) and enter the System Settings - Network - Wireless Network;
2). Select your own network hotspot from the wireless list, and then enter the network account and password (the computer will appear on the TV full keyboard screen, press the remote up, down, left, right keys to enter letters to enter the network account and password), the network Successful connection will be prompted.
Method 3: PPPoE dial-up Internet access Connect the cable from the modem to the Lynx box, enter the Lynx box "System Settings" - "Network Settings", click "Broadband Connection", enter the dial-up account password, and click "Start Broadband" Connect".
Lynx Box Exchange Group,
Step one: Connect Lynx Box and TV
LCD TV with HDMI high-definition cable to connect the TV and Lynx box, as shown in the HDMI HD cable, and HDMI interface
Old TVs use AV cables to connect TVs and Lynx Boxes. It is recommended to use the AV cables purchased by the Tmall Box or the Tmall Magic Box flagship store. The AV cables purchased by other channels may not be compatible.
Step 2: Connect the Lynx box to the standard power cord. The figure shows the box power cord (note: the power cord socket and the AV interface are similar in shape; do not plug the power cord into the AV port);
Second, Lynx Box how to connect the network?
After using Tmall's Box HDMI HD cable to connect the TV (or AV to connect the old TV), the Tmall Box plugs in the power and turns on automatically. Use the TV's remote control to turn on the TV and switch to the HDMI signal input (old TV switches to the AV signal Source), the TV will appear in the boot screen of the box, and then enter the network setting interface, as shown in the figure. There are three ways to connect to the internet.
1). Use the remote control of the box to operate the TV screen (set the remote controller at the box) and enter the System Settings - Network - Wireless Network;
2). Select your own network hotspot from the wireless list, and then enter the network account and password (the computer will appear on the TV full keyboard screen, press the remote up, down, left, right keys to enter letters to enter the network account and password), the network Successful connection will be prompted.
Next: How does the Lynx Box achieve home monitoring? How to achieve family karaoke