LED lighting has not officially entered the classroom lighting field

At present, the incidence of myopia in students is high. According to the survey, the environmental factors and the incidence of myopia are quite close. Among them, classroom lighting is one of the most important factors. In order to improve this situation and provide students with a healthy lighting environment, since 2008, Yan Yonghong, a professor at the School of Architecture and Urban Planning of Chongqing University, has undertaken the National Natural Science Foundation project “Study on the Health Lighting of Classrooms Based on Photobiological Effects”.

Professor Yan believes that classroom lighting not only has a great impact on students' vision health. Due to the non-visual effect of the eyes, the difference in spectrum and light intensity of different color temperature sources will also affect the students' circadian rhythm, causing excitement or fatigue, affecting learning efficiency. And psychological and physical health. Therefore, the classroom lighting lamp should not only consider the influence of the color temperature and illumination of the light source on the students, but also pay special attention to the spectral safety of the light source.

At present, classroom lighting is mainly based on fluorescent light sources, and LED lighting has not yet officially entered the field of classroom lighting. Only LEDs were used in some experimental projects. At present, it is more common to replace the old T8 fluorescent tube with a straight tube LED to obtain higher light efficiency. However, since many schools have adopted T5 fluorescent lamps with higher luminous efficiency, the idea of ​​this LED application will be greatly restricted in the future. Since the current price of LED light source is higher than that of T5 fluorescent lamp, it is not dominant from the viewpoint of light efficiency. Therefore, if we only promote the LED classroom lights with the concept of energy saving, I personally think that the prospects are not very good.

The rate of myopia among young people in China ranks second in the world. In particular, the detection rate of poor eyesight among college students is as high as 82.68%. The reason is closely related to poor classroom lighting. Compared with fluorescent lamps, LEDs are more likely to meet spectral safety requirements. Our experiments have also demonstrated that LEDs have better visual performance at the same color temperature and illumination. Therefore, from the perspective of benefiting students' vision health and relieving students' nervousness, LED has a greater advantage than fluorescent lamps and has a very large market potential.

Off-line 12V Battery Smart Pulse Restore System, also be called Battery Maintenance System or Battery Restore Solution: mainly used in the whole industry of Electric Vehicle Battery (EV as electric bike, motor and Car ), Car and Truck Start-up battery, Sightseeing car and Golf Cart power batteryWind and Solar energy storage batteryUPS Back up power systemTelecom base site battery , State Grid and Military battery for sudden affair, etc.

12V Battery Pulse Restore  off-line System fully take into account the inconsistent of the physical resonance frequency between lead sulfate crystal and battery plates, select the optimal frequency of pulse waveform and pulse current intensity to "break" and "decompose" the lead sulfate crystals, ensure the best restoration effect of sulfide battery without any damage to the plates. In order to Reduce Internal Resistance and Increase Battery Capacity and Voltage effectively.

The system is composed of 3 parts and a professional standard restore process: 1) 12V Battery Restorer Device(4.5~300Ah); 2) 12V Battery Digital Pusle Charger; 3) 12V Battery Discharge Tester.  Lead-Acid Battery Restoration system and Solution is applicable to all of Lead Acid Battery(AGM, GEL, VRLA, MF, Flooded, Dry, Traction, Deep cycle and Stationary), and widely used in 12V (4.5~300Ah) cell batteries. 

Product features
1.  The smart pulse with fast rising front is resonant with the crystal of lead sulfate to dissolve the large lead sulfate crystal under the action of charging pulse, which can improve the capacity and prolong the service life of the battery.
2.  No need to add any chemical additives, does not change the internal electrolyte composition of the battery, safe and reliable; For water loss batteries only need to add deionized water before restoring. The output pulse voltage and pulse current are strictly limited.
3.  4 independent output, can repair 4PCS 12V/4.5Ah-300Ah cells at the same time without interference.
4.  Each system is equipped with "capacity selection" gear, according to the different capacity of the battery to select the precise gear, can be ensure better protection of battery plate in repair working.
5.  Each system is provided with automatic repair function, automatic repair system will smartly adjust the pulse duty ratio based on the size and conditions of the battery without anyone on duty.
6.  Each system is equipped with "High resistance repair" function, select the high resistance repair, specially for the long term stored batteries, even if the OCV is 0 Volt, but also can be easily activated.

12V Battery Restore System

12V Battery Restore System,12V Battery Pulse Desulfating Restorer,Battery Repair System,12V Cell Maintenance Charger

Shenzhen Daceen Technology Co., Ltd. , http://www.daceen-sz.com

Posted on