After the W-type fuel injection pump body test was completed, a small high-speed in-line electrolytic deburring fixture for the fuel injection pump body (including the fuel injection pump), a small high-speed inline fuel injection pump body and a spray were gradually developed The high-pressure chamber electrolytic deburring of the pump body has been included in the main process and has been running for nearly a year. Due to the quality control of the electrolytic technology processing parts, the quality control method of the electrolytic technology processing parts is mainly to strictly control the electrolysis time, strictly control the current intensity, and effectively control the concentration of the electrolyte (adding chemicals in a timely manner). The detection method can be measured by visual inspection or using an endoscope. Cooperate with the display to make measurements and regularly replace the cathode head to ensure the accuracy of electrolysis.
The electrolytic deburring technology is applied to W-type and other fuel injection pumps. The burrs of each interpenetrating hole in the fuel pump body are completely removed, and the joint surface is smooth, which fully meets the design and process requirements. Therefore, we believe that this technology can be widely used in the deburring method of various complex cavity and deep hole parts produced by the company. Today, product quality is increasingly valued, more attention should be paid to the application of new technologies on the edge process, so as to enable deburring of the low-pressure cavity of the small-speed in-line fuel injection pump and the fuel injection pump. Modern vehicle power clean diesel power Bosch is committed to Passenger cars are moving towards a cleaner and more economical future. Bosch Automotive Diesel System Located in Wuxi City, Jiangsu Province, Bosch Automotive Diesel System was established in Kenian. As a proprietary company engaged in modern diesel injection technology and aftertreatment system, it is a partner you can trust and have great potential.
MOSO Programmable LED Driver has programmable output current and constant power design. It is a brilliant design with advanced technologies. One Programmable driver can deliver different output currents and voltage at same power. It's easy for the fixture design and flexible for varies of outdoor application.
The Programmable Power Supply that operates in constant current model. Monitored by an infrared based programming device, the fully programmed drivers offer all dimming options (0-10V/PWM/Timing control/DALI) and a wide range of output current in a single driver, which deliver maximum flexibility with customized operating settings and intelligent control options for lighting manufacturers.
This Programmable LED Driver with varies of global safety certifications, including UL, CE, TUV, ENEC, CB, SAA, BIS, KC, etc compatible with the safety regulation for different countries.
The compact metal case and high efficiency enables the power supply to operating with high reliability, and extending product lifetime to at least 50,000 hours. Overall protection is provided against lightening surge, output over voltage, short circuit, and over temperature, to ensure low failure rate.
MOSO grants the product with 5 years global warranty. Customer can refer to Warranty policy, find the closest MOSO distributors or sales representatives, to get a local replacement in case of any failure.
Programmable LED Driver
Programmable LED Driver,DALI Programmable LED Driver,Programmable Dimmable LED Driver,Dimmable Programmable LED Driver
Moso Electronics , https://www.mosoleddriver.com