TCL TV L55F3500A-3D How to Install Third-Party Software and Play TV Game Tutorials with ADB One-Click Installation Tool

TCL TV L32 (39/42/46/48/55/65) F3500A-3D installs the sofa butler through ADB one-click installation tool, this tutorial is applicable to similar models such as TCL TV L32 (39/42/46) F2510E;

Installation process 1 Download ADB One-click installation tool to the computer and unzip it. 2 Connect the computer and TV with the same router. → 3 Run ADB open tool → 4 One-click installation is complete.

Steps Step 1: Download ADB open tool and one-click installation tool

With the computer to download and decompress, there are two folders of TCPUDP debugging tool and one-click installation software, as follows


Follow the steps to view the tcl smart TV's IP address as illustrated:

System settings

Network settings

Cable network settings

Tcl TV automatically obtains an IP address

Check the TV's IP

Open the TCP UDP debugging tool



- If the message "unable to connect ip" is displayed, or if the IP address is wrong, do not tick the hexadecimal place in this step.

Step 2: Run one-click installation, install the sofa butler into another folder - "One-click installation", double-click "Double-click to run a key installation" to enter the command interface and enter the IP address of the device obtained in the previous step, and press Enter to wait. can.



If the message "unable to connect ip" is displayed, or if the IP address is incorrect, do not select the hexadecimal place in the TCP UDP debugging tool step.

Note for installing butler: If you use the sofa butler to download the application, it stays in the installation state, or you are prompted to prompt the words "Prohibited to install unknown source". Please turn on the automatic installation in “Settings” of the sofa butler kit, or try to plug in an external SD card and try again.

If the installation fails, restart the device and try again by following the steps (may be useful). Still have questions please add the following sofa butler official QQ group.

TCL TV L55F3500A-3D other installation methods: http://

Download the TV application and recommend the best application market sofa butler on Smart TV. Watch videos on smart TVs and recommend using pudding videos. Fun smart TV (and box), exciting content in the sofa forum.

Vibration Motor:

Is mainly used for adult health care products and toys micro vibration motor is a Dc Motor, the motor shaft with an eccentric wheel, when the motor rotation, eccentric circle particle is not turn the heart of the motor, make motor is constantly out of balance state, caused by inertial effect.


Characteristics: small volume, strong vibration;


Features: small size, fast speed, stable performance, low price, can use battery drive,Can change the different materials of the pendulum head
Vibration Motor  Vibration Motor
Method of use: the best stable in horizontal plane, installed on the dc vibration motor  output shaft parts, cannot use a hammer to knock, knock prone to press into the dc vibration motor  drive, may cause damage to internal components, and cannot be used in the case of blocked.

vibration motor

Operating temperature range:

vibration motor should be used at a temperature of -10~60℃.

The figures stated in the catalog specifications are based on use at  ordinary room temperature catalog specifications re based on use at ordinary room temperature  (approximately20~25℃.

If a vibration motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.


Storage temperature range:

vibration motor  should be stored ta a temperature of -15~65℃.

In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.


Service life:

The longevity of vibration motor  is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.


●Use with a load that exceeds the rated torque

●Frequent starting

●Momentary reversals of turning direction

●Impact loads

●Long-term continuous operation

●Forced turning using the output shaft

●Use in which the permitted overhang load or the permitted thrust load is exceeded

●A pulse drive ,e.g.,a short break,counter electromotive force,PWM control

●Use of a voltage that is nonstandard as regards the rated voltage

●Use outside the prescribed temperature or relative-humidity range,or in a special environment.

●Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.


when it come to volume production,we're a major player as well .each month,we rurn out  600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you Looking forward to your inquiry. Welcome to our factory.

vibration motor

Vibration Motor

Vibration Motor,Small Powerful Vibration Motor,220V Vibration Motor,Electric Motor For Vibrating

Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com

Posted on