At present, LED bulbs have reached the basic requirements of application, and the price has reached an acceptable level. The same is spherical light, why do you have to toss the LED filament lamp? Industry insiders responded: "Different quality and performance requirements, price and application site are not the same, some places are LED bulbs can not meet the application needs, this is the charm and bright future of LED filament lights." At the same time, industry insiders, LED filament lamps currently have several technical indicators that are far-fetched, such as heat dissipation and light decay, which is based on the limitation of the area of ​​the LED filament lamp substrate. In order to have a long-term development of filament lamps, it is important to break through the inherent ideas of LED lighting.
Small size, heat dissipation and light decay are big problems
The industry believes that to improve the filament structure of LED filament lamps, the current LED filament lamps use the filling of inert gas to achieve the purpose of radiation heat dissipation, and there is a big gap between the actual application and the design effect. Also, since the LED filament is a chip in the form of a COB package, the use of some effective technical means to reduce heat generation or rapid thermal conduction is a guarantee of low light decay and long life of the LED filament lamp, such as optimization of the shape of the substrate, material of the substrate. Selection, thermoelectric shunt mode, etc.
Can't completely eliminate stroboscopic
Regarding the problem of no stroboscopic flashing of LED filament lamps, the industry believes that the LED filament lamp is small in size and small in installation space. The limited installation space has very strict requirements on the volume of components, so it can be used with small power and small installation space. Only high voltage linearity of power products meets this requirement. Due to the "hole" effect caused by high-voltage linearity in the rapid passage of current, it is very difficult to achieve stroboscopic flash in large-scale production capacity under the premise that the compensation technology lacks fine technical means. There is absolutely no stroboscopic and there is no absolute means to solve it. Only the technical means can be used to reduce the "hole" effect and control the stroboscopic to a certain extent.
China IOT Conference Series [The 3rd China LED Intelligent Lighting Innovation Application Summit Forum ] will invite Zigbee Alliance, WiFi, Bluetooth and 2.4G technology major supplier executives to share their market insight and latest development results, I hope you can grasp This rare opportunity to exchange, find better business opportunities, and find a higher partner.
DC emergency standby power supply system consists of AC distribution, charging unit, storage battery DC distribution, automatic switching against city grid failed in power supply, etc. It is applied to provide uninterrupted power supply service for the important DC electricity loads.
AC emergency Backup Power Supply system, basing on DC standby power supply, is equipped with single phase (three-phase) DC/AV inverter. It is applied to provide uninterrupted single phase (three-phase) AC power supply service for the important AC electricity loads.
Emergency Power Supply,Led Emergency Power Supply,Emergency Battery Power Supply,Emergency Battery Operation Power Supply
Xinxiang Taihang Jiaxin Electric Tech Co., Ltd , https://www.chargers.be