The camera part contains a comparison with one plus three and iphone7, welcome to watch.
Foreword: Talk about millet I understandAfter the first generation of mobile phones shouted "For a fever," Xiaomi's mobile phone continued to have a fever until Xiaomi 4. There are many meanings of fever. For example, the concept of top-level cell phone configuration has always been upheld. Before Xiaomi 4, Xiaomi also did. This point, there is also a Xiaomi famous mobile phone fever, high-end configuration of the power and heat control has been a problem in the mobile phone industry, millet explored this way for so many years, finally got in the millet 5 A relatively balanced solution - down-clocking, castration configuration. (The 1999 Yuan standard version of the millet 5 and the protagonist of the millet 5s processor are all castrated versions. As for whether there is a gap in experience, see below )
At the same time in other mobile phone experience, such as taking pictures, look hard. (Think of millet proudly humming, no design is the most beautiful design) but did not think that millet 5 mobile phone performance is quite good, but in the golden period of mobile phone sales (just released two months ago, I personally , there is no basis, please forgive me) but there has been a problem of production capacity, double glass panel and ceramic back cover yield has not been high, the strong force of friends and merchants, resulting in sales of Xiaomi 5 is not as expected, but also successfully fell out of domestic sales The top five in the list. Xiaomi's mobile phone has indeed entered a bottleneck period, and is even less popular than Xiaomi Department Store.
Ever since, in October after the launch of Xiaomi 5, Xiaomi 5s was born. Personally think that Xiaomi 5s should be a version of Xiaomi 5's R&D solution—ultrasonic fingerprint version. It uses a metal body instead of a glass back cover to increase production capacity. , reduced the value of the color.
As a strategic transitional version, what is the performance of Xiaomi 5s? Is it a mobile phone suitable for use as a main mobile phone? Lazy classmates please pull down the bottom and click on one of the praises and then look directly at Jayen. The hard-working person, please look down.
Configuration overview:
â–¶ Xiaolong 821, with a maximum core of 2.15Ghz, small-core 2.0Ghz 3/4G storage
â–¶ Sony IMX378 camera, 1200W pixels, 1/2.3 inch large sensor
â–¶Ultrasonic fingerprint identification
â–¶5.15 inch 1080P LCD screen
..............................................................................
Millet's packaging box goes further and more apples, from the previous kraft paper box to the current pure white single logo packaging, can be considered an imitative reference and learning?
World cover
What's interesting about this packaging is this one. The left and right sides are the openings of the charging head and the data cable. These parts of Xiaomi 5s are all mixed together in this boxy box. It can be seen that there is a certain amount of effort.
Oh, the content is very simple, so many
The legendary screen-out aesthetics, what do you think?
The initial wallpaper used a darker wallpaper to cover the big black edges
The back of the silver metal sandblasting process is very similar to the ipad process, two put together a seamless
Please ignore my poor PS technology... next time P is good
The right side of the fuselage, the power button and volume keys, high-definition CNC chamfer reflects the texture of the following dish is quite fun, the fuselage curvature is very hand, in addition the power button and the volume button slightly loose, can swing up and down
On the left, a sim card slot
The bottom of the fuselage is mic (microphone) on the left side, and the right side is a speaker. In order to design the two sides symmetrically, the middle type-c charging port.
There is only a 3.5mm headphone jack on the top of the fuselage, castration infrared function of the millet 5 body, I think, infrared is also very useful, I do not know what the purpose of this millet ... ...
There is a connection between the headphone port and the injection molding bar... This, it looks good, doesn't it look good to you.
The camera uses Sony's large bottom CMOS IMX378 with dual-color flash. The design of the injection molding is basically a fusion version of iphone7+ plus 3, and a noise reduction mic is placed in the middle of the injection molding strip.
The camera is also flat and the millet camera shrinking technology is quite good
Millet 5s insisted on the miserable big black edge design of Xiaomi 5, and it was quite beautiful and bright screen... I used to be very calm with Huawei P9 and mate8.
The grit of the sandblasted metal is also quite beautiful, and the curvature of the back is beautiful
(·-)design
The left side is the distance sensor, and the right side is a 400W large-pixel front camera, which is a bit like a big eye. The front glass panel is 2.5D glass, making the whole machine's visual experience more rounded
The fingerprint recognition at the bottom is a bright spot for Xiaomi 5s. It looks like it has made a groove in the glass. It doesn't have the kind of metal circle that ordinary fingerprint recognizes. It looks very beautiful and transparent. As for the recognition success rate and speed, Please continue to look down.
Still quite handy
Extinguishing screen aesthetics, you watch yourself. I posted a bit of a film
to sum up:
....................................................................................
(1) CPU, memory and experience
Millet 5s configuration is basically the most powerful this year, Andrews, but the 5s of the Xiaolong 821 is used by Reebese as the endurance version of the castration 821, the main core of the frequency dropped from 2.35Ghz to 2.15Ghz, other to maintain constant.
First look at the difference between Xiaolong 821 and Xiaolong 820.
Xiaolong 821 and Xiaolong 820, are 14nm process, the size of the nuclear frequency have improved, large nuclear upgrades are not, coupled with the castration of millet, 5s on the 821 big core and 820 almost no progress, progress in the The small core, 821 small nuclear frequency to 2Ghz, compared to the 820's 1.6Ghz have a good improvement, although the limit of limited performance enhancement, but the daily use of the experience may be a certain increase.
Let's look at the good points of running
There is a certain gap between this score and the actual 14.2 W score. This is due to the fact that the mobile phone has a relatively long start-up time, plus a variety of software that is resident in the background.
Geekbench4 is more interesting, the beginning score is miserable, I do not believe more than a few times and run like this
Well, we all know that running points can represent some things, but they cannot experience the actual experience of mobile phones. Then, let's talk about the practical operation experience of Xiaomi 5s under this hardware configuration.
The first thing I asked was a recent mobile game called Onmyo.
During the game, open the fine picture quality, experience is very smooth
Let's look at the CPU, the big core is working, and it is not full, indicating that 821 is quite capable of dealing with this kind of game.
The temperature of the game played for a while is also quite good, winter can also warm hands
How can a new cell phone brush less aunt! The experience is also very smooth, with almost no Caton
We also use Weibo, which is also very smooth
So the experience is probably like this, the daily use process is very smooth, the speed of the open app is also a great bar , on a millet phone or a millet note I left tears, when the 4.4.4 millet note just arrived on the card to Cheung Cheung
however
I think 4G's storage is still not enough, although it can barely keep the system smooth, but it will often eat less than 1G of memory.
I have used Huawei P9 low profile (3G storage), Xiaomi 5 standard (3G storage), also used mate8 high allocation (4G storage), millet 5s high allocation (4G storage), one plus 3 (6G storage ), LeTV PRO3 (6G shipped) after!
Draw an irrefutable conclusion:
3G's operation and storage will seriously affect the mobile phone experience, at least in the process of playing the mobile phone, it will be stuck from time to time, and sometimes even ten to twenty seconds.
The 4G and 6G transport will basically have no stuck condition.
(2) Screen
The order of the points I selected for mobile phones is this: First, look at the configuration, and don't look too low. Then look at the screen, the screen needs to see the real machine, otherwise it is difficult to really understand whether this screen is in line with their hobbies, whether right.
Then I want to say that since I bought Xiaomi note, I have been deeply fond of the palette of the Xiaomi screen (which of course does not mean that everyone likes it). Because Xiaomi's screen is warmer, I like warm screen. Maybe because the original first mobile phone iphone5 is the screen of HuangHuang, so the default brain screen is good.
Well, take a picture of the screen first
Well, I'm going to talk about the most important point in the picture. 1080P everyone understands this and is quite satisfactory.
The 94.4% NTSC gamut is a very good gamut in terms of parameters. What about the actual perception? For a while, compare it with 80% NTSC gamut LeTV PRO3.
Look at the fineness of the screen first
1080P LCD screen performance is still very good in the 5.2 inch
Look at the viewing angle
Next is
Millet 5s 94.4% NTSC color gamut VS LeTV PRO3 80%NTSC color gamut
The result of the competition is that... Millet 5s has a lot more yellow than LeTV PRO3. Ah, don’t stain it. I’m talking about a lot of screen yellowing. Another advantage of the color gamut is that the overall color is more intense, and the picture is not very obvious. I'm sorry...
In addition, glucose I want to measure their performance on the pure black display, the performance of both mobile phones are similar, after all, LCD screens, limited by the principle of light is no way to do it. (In other words, the light leakage control is OK, there is no obvious light leakage.)
(3) Ultrasonic fingerprint recognition
This time, Xiaomi spearheaded the ultrasound fingerprinting at the press conference. The module can be set under the glass, giving more possibilities to the design of the fingerprint recognition area. As a result, Xiaomi actually designed the fingerprint recognition design of Xiaomi 5s. Very beautiful.
however
Although the designers of the millet conference were very painful about the R&D experience, and finally moved to a sentence, when the program was introduced in 3.0, um, it could be mass produced.
However, ultrasonic fingerprinting of millet 5s is still immature, mainly in the following three aspects:
1: The entry speed is too slow, of course, this effect is not great, after all, you only record once.
2: Recognition success rate... At the beginning of use, it was successful about 5 times. Then one finger recorded two fingerprints that were slightly better. Occasionally, it was able to solve one time and occasionally tried 2 or 3 times.
3: Unlocking Speed ​​There is no quicker unlocking with capacitive fingerprints. Compare it with one plus three.
This gif normal speed, of course, because one plus three has no transition animation
This time I slowed down the speed of the gif, it is clear that one plus three is much faster
Therefore, we hope that the follow-up will increase software optimization and become an excellent fingerprint reader sooner.
PS: The design of this glass groove is very transparent under the light. I especially like this design.
(4) 3D TOUCH
Those who have read the conference know that Rebs did not emphasize 3D touch at the 5s conference of Xiaomi, and only supported it with high gear. Why? Look at the two pictures and you will understand.
Millet's 3D touch can only say that adding this feature is actually not useful, because ... at least I see it, there is no third-party app support ... and even Alipay does not support
So this function is basically a gimmick and we look forward to the follow-up software updates.
(5) UFS2.0
Let's look at a picture first
This picture is to tell us the history of the development of mobile phone flash memory in recent years, millet 5s uses the latest UFS2.0, theoretical speed is very alarming.
In order to get close to life, I think this should be a practical copy of the file to be considered a real test. Ever since
It eventually took 58.26s. The file was 1,288,531,493 bytes. On average, it transferred about 22,216 bytes per second, about 22MB/s.
Proximity is probably the average USB3.0 transmission speed.
What may really be in the spotlight is the fast mutual transmission of internal storage.
This power is enough in daily use
(6) Battery and battery life
Millet 5s battery capacity of 3200mAh, support QC3.0 charging scheme
Please allow me to steal a map of zealer here
5 hours remaining power I give a reference to several models with close screen sizes.
Huawei P9: 38%
Glory 8: 50%
Millet 5: 46%
Meizu PRO6: 23%
VIVO X7: 46%
So in general, Xiaomi 5s is quite satisfactory, not particularly good and not too bad.
Of course, since the aunt chose me, I can't just use other people's data, I also did my own charging record. Pictured
It took 1 hour 37 minutes to charge myself. (This data is not excessive because of small disturbances in the charging process)
Charging power, jump at any time, measured power when playing mobile phones, this point is still a plus 3 powerful
Another battery life I go to work one day, chat WeChat microblogging information to see the game does not play home about the remaining battery is 30-40%, have to play at night, so a day charge did not run.
to sum up:
....................................................................................
Millet 5s conference has basically been blowing this "night of the eyes" CMOS - MIX378. Its 1/2.3 large photosensitive element is indeed very powerful. At the same time castrates the proud 4-axis optical image stabilization on millet 5.
What do you see? What do you see? As the saying goes, the end of a large pressure dead! It's all big. I don't know how much.
Let's take a look at the camera's interface
It should be noted that the photo is preferred, this is fun, in short, a bunch of people always have a picture of someone who is easy to close their eyes. At this time, this function can take more pictures and then it will be the best in each picture. Look at the face synthesis one.
In addition, the RAW function is also convenient for some of the more professional photographers to make plans later.
Do not talk nonsense, look at proofs
Of course, I have to use the resources of my mobile phone to make a comparison.
First, make a similar price, a fairer duel
Millet 5S VS plus 3
The time taken here is about 5 o'clock. The sky is already dark and dark.
Under the dim light, I did not expect the famous green color in millet to be overtaken by one plus three.
Grass color is also a plus 3 more nice to please the eyeball
Resolving power, one plus three 1600W is also not a small advantage over millet 5s
In general, the photos of Xiaomi 5s are very close to one plus three, and the white balance of dark light is actually more accurate than one plus three, but one plus three proofs are more pleasing.
In addition, I have to admire one plus three, IMX298 can actually tune to this point ... ... also use IMX298 LeTV PRO3 and Huawei mate8 has been burst horizon.
Another unfair big fight, still a dark photo duel, the three-day imaging is very close to the image quality did not have to say, only to do a night photo comparison. And this time is the limitless low light å“Ÿ~ the dark days in the mountain ditch
Millet 5s VS One plus 3 VS iphone7
This is a sad story. The excellent one plus 3 and millet 5s in the Android camera were taken by the iphone7.
After reading this photo, I fell into deep contemplation. What kind of color is this fire? Iphone7's photo margins retain more details, one plus 3 and millet 5s are in order to show the basic black out of the edge of the fire out
Finally, millet 5s and one plus three finally regained the city in anti-glare, iphone7 glare is still quite miserable
Finally, a few more proofs ended the test today, including the landlord's own cooking (yes, I just wanted to show off)
4s slow shutter shot trickle effect, hand-held a bit paste please forgive me
This is the landlord himself burned! It's delicious!
The last is the front camera. I always felt millet's beauty was a little over.
When the hand is in front of the face, it will give priority to the beauty hand.
There is also a piece of advice. If your female friend uses a millet phone, don't trust her selfie.
Please don't trust her selfie.
Please don't trust her selfie.
to sum up:
..............................................................................
Let me give it a try. MIUI is also known as ADUI. At the very beginning, it was a kind and good boy. It worked hard for the well-being of the people. Later, one day, the MIUI function developed into a bottleneck. It was updated every week. The content is a superficially small upgrade, or simply fix the bug.
Later, the functions that could possibly be added couldn't be found. So Lei Jun called a group of advertisers and added a bunch of boring ads to MIUI. Since then, MIUI has renamed ADUI, and ADUI reached the version number 7. Peak, (I started with MIUI6). At MIUI8, the engineers slightly converged. The advertisements everywhere were a little less. I sincerely hope that MIUI engineers can listen to everyone's opinions and stop saying anything like, "People like good ads." .
Well, apart from the issue of advertising, MIUI is still a great domestic UI. The technology accumulated for many years makes the fluency and experience of the mobile phone very good. Especially after Android 6.0.
In addition, due to the influence of this set of mechanisms, there will be a certain amount of apps left behind in the background, that is, the use of powerful clearing is also not clear, so the rest of 4G's storage will generally be about 1.4G. (It is 2G that shows just after the completion of cleaning)
So I do not understand what the significance of the existence of the 5G millet 5s exists is, in order to give me black a black point. Say good for fever? ?
..............................................................................
I... finally wrote it here
First, the advantages and disadvantages of the conventions are summarized:
advantage:
1: The experience is smooth (it's really smooth and I don't even get stuck with Caton)
2: It's great
3: I think the above two points have already been praised
Disadvantages:
1: The fingerprint recognition rate is not high
2: The fingerprint recognition rate is not high
3: The fingerprint recognition rate is not high (because this has a great impact on the experience, ah, the average mobile phone user unlocks around 80 words per day, and the enthusiasts are around 120, and quickly correct the software algorithm to increase the recognition rate!)
4: In fact, there are no other shortcomings in use, and only one day of life is not a disadvantage?
Millet also slowly from the hardware fever to the current user experience, grew up and grew up
Ah, I forgot to say that when I didn’t grab the rice note, I was also black for a while.
Ask the students to leave the court in an orderly manner, and if they wish, they can leave a wave of silver.
Heller Reflow Oven Parts
We specially provide Heller reflow oven parts for the customers.Low cost, original and new or used ones or repair service.
All the parts will be tested seriously before delivery, please trust us.
Heller Reflow Oven Filter
Heller Reflow Oven Parts
Heller Filter For Heller Reflow Oven
Heller Reflow Oven
High Quality Printer Spare Parts
MPM Printer Spare Parts
SMT Spare Part
SMT Printer Spare Parts
Printer Spare Parts
Dek Spare Parts
Heller Reflow Oven Filter,Heller Reflow Oven Parts,Heller Filter For Heller Reflow Oven,Heller Reflow Oven
Shenzhen Srisung Technology Co.,Limited , https://www.sr-smts.com