T100A
The T100A is a highly integrated All-in-one Visual Processor that provides major cost saving soluTIon for the portable applicaTIons. T100A has built-in high performance Triple ADCs, TCON, Triple DACs, Scaling Machine with sophisTIcated upscaling and downscaling algorithms. The InnovaTIve integrated “Frame-Buffer-Less†De-interlacer can significantly reduce system cost. The T100A also integrates On Screen Display engine with 3K-word of font RAM. The device can interface to an external micro-controller through 2-wire serial bus interface .
Application
Portable AV system Portable TV set Progressive Car TV setFeatures
Integrates 9-bit Triple Analog to Digital Converters (ADC) & Phase Locked Loop (PLL) Scaler supports 2-D adaptive intra-field de-interlacer and non-linear 16: 9 aspect ratio. Built-in Pre-amp, mid- level & ground clamp circuit Automatic Clamp Control for CVBS, Y and C Max Input configuration up to 9xCVBS, 3xS-video and 3xCVBS, 3xYPbPr Separate Luminance and Chroma Enhancer supportsY-DLTI, Black Level Expansion, Contrast and Brightness adjustment
C- Supports DCTI, Saturation and Hue adjustment. 2.5v & 3.3V operating voltage RGB Triple DAC output Built-in On Screen Display Engine
-3K-word OSD SRAM memory
-Supports font or bitmap modes
-Supports character blinking, overlay, shadow and border functions
-Fully programmable character mapping
-Supports alpha blending & Zoom-in / Zoom-out function
-Optional fonts can be stored in off-chip serial EEPROM Direct interface to a (27.0MHz) Crystal Supports 2-wire (normal speed) or 4-wire (high speed) modes Pulse Width Modulation Outputs Package: 100-pin LQFP Integrates 9 -bit Triple Analog to Digital Converters (ADC) & Phase Locked Loop (PLL) Scaler supports 2-D adaptive intra-field de-interlacer and non-linear 16: 9 aspect ratio. Built-in Pre-amp, mid-level & ground clamp circuit Automatic Clamp Control for CVBS, Y and C Max Input configuration up to 9xCVBS, 3xS-video and 3xCVBS, 3xYPbPr Separate Luminance and Chroma Enhancer supports
Y-DLTI, Black Level Expansion, Contrast and Brightness adjustment
C- Supports DCTI, Saturation and Hue adjustment. 2.5v & 3.3V operating voltage RGB Triple DAC output Built-in On Screen Display Engine
-3K-word OSD SRAM memory
-Supports font or bitmap modes
-Supports character blinking, overlay, shadow and border functions
-Fully programmable character mapping
-Supports alpha blending & Zoom-in / Zoom-out function
-Optional fonts can be stored in off-chip serial EEPROM Direct interface to a (27.0MHz) Crystal Supports 2-wire (normal speed) or 4-wire (high speed) modes Pulse Width Modulation Outputs Package: 100-pin LQFP
Lightsaber could be come true, this light stick design we make the light soft and nice. One way light saber or two ways light saber is available. The light sick could be install on floor and wall, indoor and outdoor are available. Different color could be provided. Just make the life more and more interested.
Fiber Optic Glow Stick Light,Fiber Optic Glow Sticks,White Fiber Optic Wands,Fiber Optic Sticks
ZHONGSHAN G-LIGHTS LIGHTING CO., LTD. , https://www.glightsled.com