First, packaging articles
The millet amplifier PRO adopts a brand new unified white packaging design. It adds a physical map to enhance the product identification. Compared with the previous and second generation amplifier products, the difference in high-level sense can be seen from the packaging, and the eye-catching millet WIFI amplifier on the side of the box is marked. And use orange PRO pattern to indicate its high-end identity! MI word LOGO decorated on the left and right sides of the box, full of sense of technology!
The details of the bottom of the package are similar to those of the other millet routers. The description of the bottom of the router is similar to that of the boot installation. The bottom of the product information nameplate clearly shows that the amplifier has been upgraded to a maximum of 300M wireless expansion, plug and play! The wireless type is WiFi2.4G, which does not support 5G data transmission. For the immature 5G transmission scheme, 2.4g has met our daily needs in most cases!
Second, open the box
Tear the seal, open the box, take out the instruction manual and you can see the amplifier looks like, black square box, left and right each with a rotating external antenna, very cute, this appearance with the previously released millet WiFi power cat The "WiFi expander" is very similar.
Product family portrait (wifi amplifier PRO body and instruction manual)
The center of the millet wifi amplifier is a prominent MI logo on the front, and the work indicator is on the bottom of the middle of the millet. It shows the working status through displaying different colors. The two external antennas of 2x2 can be used to realize 180-degree rotation, which is convenient for the user to reverse. Optimization, the biggest highlight of this upgrade transmission rate reached 300Mbps, the maximum support of 64 devices connected at the same time, so this amplifier greatly enhances the practicality! However, the official proposal is that up to 24 people be online at the same time to get a better online experience, and 24 devices can absolutely meet the needs of all the general households on the Internet, and users need not be too concerned about this point.
The reset switch is arranged in the middle of the bottom. To reset it, just use a fine pin to press it for more than 5 seconds. Wait for the indicator to turn into a slide light and start waiting for the initialization operation, which is consistent with the operation mode of other router products.
Millet wifi amplifier PRO using the national standard 2 hole plug, plug-in power supply design, the bottom is affixed with the product nameplate, surrounded by the edge of the heat vent design to ensure that the router stable work!
The appearance design is much more dazzling than the previous one or two generations of the USB version. Due to the addition of the in-line power supply, the internal power conversion circuit and the heat dissipation requirements are harsh, the volume cannot be further reduced, and it is generally coordinated on the wall. , slightly thicker! Just black looks a bit obtrusive, not very dirty, this is a bit small enough!
Third, contrast articles:
USB version with millet smart socket to use the plug in the wall, in fact, the volume is quite large, but the white easier to integrate into the home environment, black unexpected sense indeed stronger, in-line type does not need to find another adapter, plug and play is more convenient!
Comparison of appearance volume of two generations of products
Wall installation physical map display
Fourth, connect and use
Same as the other Xiaomi smart device connection steps, first insert the amplifier into the socket, then the yellow light flashes waiting for the user to connect, open the mobile terminal Mijia APP, click the + in the upper right corner to enter the device model menu, pull down the millet WiFi amplifier PRO icon, click Enter the device connection according to the prompts. If the connection is paired with multiple failures, you need to manually restore the factory settings and repeat the previous steps. Usually, you can connect successfully after several simple steps.
Connection example Figure 1
Connection example Figure 2
The firmware is automatically upgraded:
Xiaomi wifi amplifier PRO supports the automatic firmware upgrade function during the free time, continuous performance optimization operation, and constantly improve the user experience!
The brand new millet wifi amplifier PRO adopts a multi-directional rotating 2×2 external antenna, and the transmission rate is increased to 300 Mbps. It can be expanded to 64 people at the same time. It can use the standard plug to take power directly. Compared with the previous generation amplifier, there is no need to use the power adapter separately. , Plug and play, very suitable for large areas, multi-room signal expansion, through pro-test, this amplifier both speed and stability are due to previous generation products, 79 yuan is easy to use and not expensive, very worth recommending to buy! Poor signal coverage of the home partner may wish to log in the official store to see this zoom artifact it, and finally thank you for your reading support! Remember replies like!
Smart TV/box information can focus on smart TV information network sofa butler (http://), China's influential TV box and smart TV website, providing information, communication, TV boxes, smart TVs, smart TV software, etc. Answering questions.
Modular Plug,modular jack rj45,modular jack cat6,mod plugs
NINGBO UONICORE ELECTRONICS CO., LTD , https://www.uniconmelectronics.com