The setting of the wireless local area network should be done for different operating systems, so how should we proceed for the specific parameter configuration, here is a detailed explanation for us.
I believe that everyone will not be too unfamiliar with the setting of LAN network parameters. So for the current popular wireless LAN, is the network parameter setting the same as the previous setting method? In fact, the wireless LAN is not very mysterious. Its parameter setting is largely similar to the previous setting method; the following content of this article will give you a detailed introduction on how to set the wireless LAN network parameters under various operating systems.
A Preparation
Before setting the network parameters, you should properly install the wireless network card in each computer that needs to transmit information, and adjust the distance between the computer and the computer, as well as the location of the computer, so as not to affect the normal transmission of the signal . Then follow the following methods to configure the network parameters appropriately.
B. System operation one
1. Under Windows 98, Windows Me and Windows 2000
Since Windows 98, Windows Me, and Windows 2000 systems themselves do not have relevant components to support the use of wireless networks, before you set up network parameters, you must use a special wireless network management and configuration program to set up Network parameters. At present, many wireless network cards will be accompanied by the program Client Manager. Install the program correctly in the corresponding operating system according to the conventional method, and then perform the following setting steps:
1. On the desktop of Windows 98, Windows Me, or Windows 2000, click the Start menu with the mouse, and then execute the "Program" / "Wireless" / "Client Manager" commands in sequence, and open a title entitled "Wireless Client Management" Setting interface;
2. Move the mouse to the menu bar of the setting interface, click the "Operation" menu item in it, execute the "Add" command from the drop-down menu that opens later, and then select "Edit Configuration Introduction" from the subsequent lower-level menu that appears "Option, so that a" Select Profile "setting dialog can be displayed on the screen;
3. In this setting box, you can click the "Edit" button with the mouse, the system will then open a setting dialog box titled "Edit Configuration"; if you don't want to use the default configuration name, you can Click the "Add" button in the "Select Profile" setting dialog to re-create a wireless network configuration name;
4. If you want the computer to be used in different LANs, you can use the "add" function to create multiple different configuration files, then you only need to select the configuration name related to the corresponding LAN, you can quickly set up The wireless network parameters related to the corresponding local area network;
5. Next, you can use the mouse to click the "Network Type" drop-down button in the "Edit Configuration" setting dialog box, select the "Peer Working Group" option from the pop-up drop-down list, and continue to click the interface with the mouse The "Next" button;
6. The "Identify Network" setting interface will appear on the screen. In this interface, you can click the "Scan" button with the mouse, so that the Client Manager program can automatically scan the current computer system that can be used. Peer-to-peer wireless network and display the results correctly;
7. In the search results page, use the mouse to select the searched wireless network, and then click the "OK" button on the search page again to exit the search results page, return to a large number of "identified network" settings interface, and continue to single Click the "Next" button;
8. In this way, you will see a dialog box titled "Set Security", where you can select the "Enable Data Security" check box to encrypt during data transmission to ensure the security of wireless network communications. Enter the key to be set in the "Key" setting field. However, if you are not transmitting important file information, you can also uncheck this checkbox to encrypt the information. If the information is not encrypted and transmitted, then the information transmission will occupy less computer system resources;
9. After setting the security parameters, click the "Next" button in this interface to open a "Power Management" setting dialog box. If you are using a laptop, you can use the mouse to select the "open" option here to enable power management features to reduce power consumption. However, once the power management function is activated, the wireless transmission performance of the local area network will be reduced, so the information transmission rate and the transmission distance requirements will be reduced;
10. If the power management function is turned off, although the information transmission will consume a lot of power, the wireless transmission performance of the network will be guaranteed, especially the information transmission rate can reach the fast standard, and the transmission distance can also be farther a little;
11. After configuring the power management function, click the "Next" button with the mouse to open the "TCP / IP Behavior" setting dialog box, where you can use the mouse to select the "Update IP address when selecting this profile" Option, so that when the computer moves from one network to another different network, it can automatically complete the update of the IP address;
12. Finally, click the "Finish" button in the setting interface with the mouse to end the setting of the LAN wireless network parameters.
After setting the network parameters, you can transmit information to each other in the local area network. During transmission, there may be a phenomenon that the signal is not stable. At this time, you should adjust the distance and position between the computer and the computer. If the connection is unstable, then the quality of the wireless network card may not be very good. You may wish to try again by replacing the network card.
B. System operation two
2. Under Windows XP
In comparison, the steps to set the wireless network parameters under the Windows XP system are simpler. After all, the Windows XP system itself already provides users with good support for the wireless network, and you can set them directly in the "Network Connection" window. Network parameters, without the need to install additional wireless network management and configuration software. The following is the specific parameter setting steps:
1. On the Windows XP system desktop, click the "Start" / "Settings" / "Control Panel" command in turn to open the Control Panel window, double-click the network icon in it to open the "Network Connection" interface;
2. In this interface, right-click the "Wireless Network Connection" icon and execute the "Properties" command from the shortcut menu that opens later, so that the system automatically displays the "Wireless Network Connection Properties" setting dialog box;
3. Here, you can use the mouse to select the "Wireless Network Configuration" tab, and then in the tab page that pops up, use the mouse to select the "Use Windows to configure my wireless network configuration" multiple option, so that automatic wireless network can be enabled Configuration function;
4. Then click the "Advanced" button here with the mouse to open a "Advanced" settings dialog box, and select the "Computer-to-Computer (Specific)" option in this dialog box, so as to realize the interaction between computers and computers connection;
5. If you want to be able to connect directly to the computer, and you want to keep the connection to the access point, you can use the mouse to select the "any available network (preferred access point)" option;
6. When the wireless network of the access point is preferred, the system will first try to connect to the wireless network of the access point if it finds an available network; if the access point network in the current system is not available, the system will automatically try to connect to the right And other wireless networks;
7. For example, if you use a laptop in the wireless network of the access point at work, and then move the laptop to another computer to use in the computer network, then the automatic wireless network configuration function will automatically change the wireless network as needed. Parameter setting, you can directly connect to the home network without any modification;
8. After completing the above settings, use the mouse to click the "Close" button in order to exit the setting interface, and click the "OK" button to complete the wireless LAN wireless connection setting work, if the parameter settings are correct, the system will automatically appear wireless network The prompt that the connection has been successful.
Aluminum circuit boards is a metal-based copper clad plate with good heat dissipation function. Generally, the single layer is composed of three-layer structure, which is a circuit layer (copper foil), an insulating layer and a metal base layer. Also used for high tech use is designed as double layers, the structure is circuit layer, insulation layer, aluminum base, insulation layer, circuit layer. A very small number of applications are multi-layer boards, which can be made of ordinary multi-layer boards combined with an insulating layer and an aluminum base.
Aluminum PCB characteristics
â— Surface Mount Technology (SMT);
â— Extremely efficient treatment of thermal diffusion in circuit design;
â— Reduce product operating temperature, increase product power density and reliability, and extend product life;
â— Reduce product size and reduce hardware and assembly costs;
â— Replace the fragile ceramic substrate for better mechanical durability.
Aluminum PCB use:
â— Audio equipment
Input, output amplifiers, balanced amplifiers, audio amplifiers, preamplifiers, power amplifiers, etc.
â— Power supply equipment
Switching regulator, DC/AC converter, SW regulator, etc.
â— Communication electronic equipment
High frequency amplifier, filtering appliance, reporting circuit, etc.
â— Office automation equipment
Motor drive, etc.
â— Automotive
Electronic regulator, ligniter, power controller, etc.
â— Computer
CPU board, floppy disk drive, power supply unit, etc.
â— Power module
Inverter, solid relay, rectifier bridge and so on.
â— LED lighting
With the promotion of energy-saving lamps, various energy-saving and beautiful LED lamps have been well received by the market, and aluminum PCB used for LED lamps have also begun to be applied on a large scale.
Aluminium Pcb,Aluminum Pcb Prototyping,Aluminium Pcb Board,Aluminium Circuit Boards
Chuangying Electronics Co.,Ltd , https://www.cwpcb.com